Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGenie Garage Door in West Hollywood, FL | Craftsman Garage Door Repair
If your Genie in Hollywood opener is grinding, clicking, or refusing to close, here’s the short version: we repair, retrofit, and replace Genie systems across the 33021 pocket, and we’re usually at your door the same day you call. The thing that makes our Genie work different in West Hollywood is that we know these units are often blamed for problems that actually start in the door itself. Call (844) 734-6077 and we’ll figure out which it is before you spend a dollar on parts.
We’re Craftsman Garage Door Repair, and we’ve been servicing Genie openers in older Broward County homes long enough to recognize a chain-drive 750 from across a driveway. We’re an independent Genie service provider, not a manufacturer-authorized shop, which means our only interest is a correct repair that lasts. Full-system coverage from the torsion springs to the wall console, with no push toward a replacement when a board swap or gear kit will do the job right.
Why West Hollywood Residents Choose Us for Genie Service
Most of the Genie units still running in West Hollywood are ChainMax chain-drives and SilentMax belt-drives that were installed fifteen to twenty years ago. They show up on mid-century single-family homes, small multifamily buildings, and low-rise commercial bays along the main corridors. We know the exact failure points on these units because we see them every week in this ZIP.
Our owner, Marco Delgado, grew up working with his hands in South Florida’s heat and learned system diagnosis through Miami Dade College’s vocational program. He’s been doing garage door work in the Miami area for going on two decades and the thing people remember is that he tells you exactly what’s wrong before he quotes a number. That’s the standard our techs work to on every Genie call in West Hollywood.
We stock Genie OEM logic boards, belts, gears, and Intellicode remotes, and we carry quality aftermarket equivalents when OEM parts are discontinued or overpriced for the job. The goal is a durable repair on the equipment you already have, not an upsell to something you don’t need.
Styles & brands we work with






Common Genie Garage Door Problems We Solve in West Hollywood
- Intellicode remotes and keypads that stop syncing: West Hollywood sits in a lightning-heavy subtropical pocket, and summer thunderstorms produce power surges that knock out Intellicode-era receiver and logic boards. If your remote stopped working after a storm, the board likely took a hit and needs replacement or reprogramming. We fix this same issue several times a month on Genie units across 33021.
- Chain and belt sag with stripped drive gears: The humidity in West Hollywood accelerates wear on drive components, and when a door has warped out of balance over decades, the opener strains against it until the gear strips. A Genie opener that runs but grinds or jerks is usually telling you the door needs attention before the opener does.
- Safety sensors that won’t let the door close: Misaligned or corroded photo-eyes are the single most common Genie service call in older low-rise and multifamily openings in West Hollywood. Salt-laden coastal air corrodes the sensor housings, and years of door movement knock them out of alignment. The door reverses, the lights flash, and nothing closes. We realign or replace the sensors and test the full reverse function before leaving.
- Battery backup and wall console failures: On SilentMax and ChainMax units with battery backup, the heat plus salt air in West Hollywood corrodes the connectors and the internal backup battery stops holding a charge. The console goes dark or the opener runs intermittently. It’s a part we replace regularly here.
- Opener blamed for a door problem: This is the call we get most in West Hollywood. A Genie opener that runs fine but won’t move the door, or starts closing and reverses, is often fighting a warped wood or early steel door with rusted hinges and worn rollers. We always check the door’s balance and hardware before touching the opener. Fixing the actual problem saves you from replacing an opener that was never broken.
Genie Service in West Hollywood: What Local Conditions Mean for Your Equipment
Genie service in Carver Ranches and West Hollywood share similar conditions, and this area’s build-out tells the whole story of why Genie openers age the way they do here. This is a mature Broward County community in ZIP 33021 where most of the housing stock went up from the 1950s through the 1980s. The garages are original or heavily retrofitted 1-car and 2-car openings, and a lot of them still carry the original wood or early steel doors those homes were built with. Those doors have spent forty, fifty, sometimes sixty years in direct South Florida sun, seasonal downpours, and salt-laden air. They fade, warp, and lose their balance. The Genie opener bolted above them keeps running, but it’s working against a door that’s no longer square in its tracks. Around the Hollywood Boulevard and 33021 corridors, our techs regularly open up a Genie service call only to find the opener is fine and the springs, hinges, or rollers are the real failure. That local reality shapes every Genie repair we do in West Hollywood: we diagnose the whole system, not just the opener the customer thinks is broken.
One specific case stays with us. On a mid-century single-family home off Hollywood Boulevard in the 33021 pocket, our tech answered a call where a Genie ChainMax ran but the door wouldn’t stay down and the remotes had stopped syncing. We found a storm-surged logic board plus a warped wood door dragging on rusted hinges. We replaced the board, re-paired the remotes, and then rebalanced the rollers and hinges so the opener wasn’t fighting the door. The homeowner kept the unit instead of replacing it. That’s the fix we’re after on every West Hollywood Genie call.
Genie Models & Products We Service in West Hollywood
We work on every Genie line you’re likely to have in a West Hollywood garage. The ChainMax and chain-drive 500, 750, and 1000 units are the quiet and standard chain models we see most on older installs here. The SilentMax belt-drive series is the popular retrofit upgrade in these mid-century homes, quieter than the chain models and worth considering if your current unit is on its last legs. We also service the Genie Excelerator screw-drive units still running on a share of older West Hollywood openings, and we keep Intellicode remotes and wall consoles on the truck for both the older fixed-code and Intellicode-era systems.
Parts philosophy is simple: Genie OEM logic boards, gears, belts, and remotes where they’re still available, and quality aftermarket belts, chains, and sensors when OEM is discontinued or overpriced for the job. On a 15-year-old Genie with a failed board and a shot drive train, we’ll tell you straight that a new opener is the better spend rather than stacking repairs. We’re not here to sell you parts you don’t need. If your Genie is still serviceable, we keep it running. That’s also where our broader work fits: Genie sales & service covers everything from a single remote to a full system retrofit.
See the difference
Before
After
Before
After
Before
AfterGenie Service Pricing in West Hollywood
Good work in West Hollywood doesn’t have to be a guessing game on price. Here’s what Genie service typically runs in this market, line by line:
| Service | Price Range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Spring Repair | $180 – $340 |
| Roller Replacement | $110 – $220 |
| Panel Replacement | $250 – $500 |
| Garage Door Repair | $150 – $600 |
What drives the cost is whether the problem is in the opener’s electrical and drive components, the door’s mechanical hardware, or both. We quote the exact number before any work starts, and that number doesn’t change once we open the unit. Free estimates, no charge to come out and look. Call (844) 734-6077 for a written quote on your Genie system.
Serving West Hollywood, FL — Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Genie Garage Door in West Hollywood
It’s more often the door than the opener, and we can tell you which in about ten minutes on-site. A Genie opener that clicks and hums but doesn’t move the door is usually trying to lift a door that’s too heavy or off-balance, which in West Hollywood usually means worn torsion springs, rusted hinges, or warped wood panels. The opener’s drive gear can also be stripped, but we check the door’s balance first. Call (844) 734-6077 and we’ll give you a straight answer.
Yes, in most cases. We stock Genie OEM Intellicode remotes and wall consoles for the common older models, and for discontinued units we carry compatible aftermarket remotes that pair correctly with the Intellicode system. If the receiver board in the opener itself has failed, we replace that instead of trying to patch around it. We’ll tell you which option makes sense for your unit before we order or install anything.
A new Genie SilentMax belt-drive or ChainMax unit will handle West Hollywood conditions well, provided the door itself is balanced and the sensors stay clean. The salt air and humidity act on connectors and backup batteries over time, so we recommend checking the battery backup and sensor housings once a year. It’s the same maintenance we’d recommend for any opener brand in this climate. The biggest threat to opener longevity in West Hollywood is a neglected door, not the weather attacking the opener directly.
The photo-eyes near the floor are misaligned, blocked, or corroded, and the opener is refusing to close because it can’t confirm the path is clear. In West Hollywood’s salt air and humidity, corrosion on the sensor housings and connectors is common, and shifting tracks can knock the eyes out of alignment. We realign or replace the sensors and test the reverse function before leaving. Call (844) 734-6077 and we’ll get it closing again.
If your Genie is less than about ten years old and the only issue is that it doesn’t have smart controls, a retrofit smart controller often makes more sense than replacing the whole unit. If the opener is older than that and you want smart features plus battery backup and quieter operation, a new Genie SilentMax or ChainMax installation is the better long-term spend. We’ll quote the retrofit and the replacement side by side so you can decide. Estimates are free: call (844) 734-6077.
Service Areas Near West Hollywood
We run Genie service across the surrounding Broward and Miami-Dade communities, including West Hollywood service area and our neighboring routes through Genie service in The Hammocks and Genie service in Country Walk. If you’re in Miami, Allapattah, Brownsville, or North Bay Village and your Genie opener is acting up, we’ll make the drive.
Book Your Genie Service in West Hollywood Today
If your Genie in Miramar or West Hollywood is giving you trouble, don’t wait for the door to stop working entirely. Call (844) 734-6077 for a free estimate, and we’ll get a tech out to your West Hollywood home today. Marco Delgado and our team will figure out what’s actually wrong first. The fix usually takes care of itself after that.
Written by Marco Delgado, Owner at Craftsman Garage Door Repair, serving West Hollywood and the surrounding Miami area for nearly two decades.