Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Sunset
Most garage door repairs in Sunset run between $150 and $600, and the work we do here often involves more than a snapped spring or a noisy roller. Sunset sits inside Miami-Dade’s High-Velocity Hurricane Zone, which means the doors on these 1970s-to-1990s ranch homes and villa clusters are wind-load-stamped, HOA-governed, and usually original to the house. That changes how a repair should be diagnosed and done. We know the housing stock here, we know the failure patterns, and we carry the parts that actually match what Sunset homeowners already have. If your door is down, straining, or making noise it shouldn’t, call Marco Delgado and our Garage Door Repair team at (844) 734-6077 and we’ll get it handled in one trip.

Why Craftsman Garage Door Repair Is Sunset’s Preferred Garage Door Repair Company
Sunset homeowners tend to be direct about what they want: a correct diagnosis on the first visit, parts that last, and a price quoted before we touch anything. That’s the way we’ve always worked. Marco Delgado built the company around brand-specific knowledge, not a one-size-fits-all service call. When a technician arrives at a Sunset villa off SW 72nd Street and sees a 1987 Chamberlain chain-drive hanging from the ceiling, he already knows what that unit’s weak points are before the ladder goes up.
The homes in Sunset’s HOA subdivisions and townhome clusters share a particular problem: the original openers and torsion springs are failing on roughly the same timeline. That’s not a coincidence, it’s age. Our work here has earned us a strong local reputation because we explain what’s actually failing before we recommend a fix. No upselling to a new door when a spring pair and cable re-tension solves it. No replacing a whole opener when the real issue is a sensor calibration or a worn gear. The right fix, not the easiest upsell.
We’re in this part of Miami-Dade regularly, so response time to Sunset is measured in hours, not days. Same-day service is available on most repair calls, and emergency spring breaks are something we treat as urgent because a door stuck halfway open is a security and pest problem in this climate, not just an inconvenience. Call (844) 734-6077 and tell us what your door is doing. We’ll tell you what it needs.
Styles & brands we work with






Garage Door Spring Repair in Sunset
Garage door spring repair in Sunset is the single most common job we do, and it’s the one most tied to this neighborhood’s home-building era. The torsion springs installed on original 1970s – 80s doors in Sunset were typically rated for 10,000 cycles, which translates to roughly 8 to 12 years of normal use. Most of those springs have been replaced at least once, but plenty of the second and third sets are now end of life, and the salt-laden air that drifts inland from the coast accelerates coil corrosion well before the rated cycle count is reached. Spring repair here runs $180 to $340 depending on whether we’re replacing a single spring or a matched pair.
What matters for Sunset homeowners is not just replacing the broken spring. It’s putting in a spring that matches the door’s actual weight, including any extra reinforcement from wind-load bracing. A spring that’s under-rated will just make the opener work harder and burn itself out. We size the spring to the door, not to whatever was on the shelf.
Why High-Cycle Springs Matter Here
For doors that get daily use, which is most of Sunset’s two-car attached garages, we usually recommend high-cycle springs rated 25,000 cycles and up. They cost a little more up front but outlast standard springs by two to three times. On a heavy original wood sectional door, that difference shows up in the opener not fighting the door every morning.
Spring Failure and Burned-Out Openers
When a torsion spring loses tension gradually rather than snapping all at once, the opener starts lifting 150 to 350 pounds it was never designed to carry. That’s why so many original chain-drive openers in Sunset villa clusters are failing now, the spring died quietly and the opener has been doing all the work. We check the spring pair on every opener repair call because a new opener on a dead spring is just another opener waiting to fail.
Garage Door Sensor Repair in Sunset
Garage door sensor repair in Sunset usually comes down to two things: alignment drift from daily vibration and humidity-driven corrosion on the sensor wiring or terminals. The photo-eye sensors mounted near the floor on either side of the door track are simple devices, but they sit in the most humid zone of the garage, and Sunset’s year-round moisture takes a toll. Sensor work here runs $120 to $240 for recalibration, wiring repairs, or replacement units.
The symptom is almost always the same: the door starts to close, reverses, and the opener lights blink. Homeowners assume the opener is dying when it’s usually a sensor that’s out of alignment or a wire that’s corroded inside its jacket. We test the sensor output before touching the opener motor, which saves Sunset homeowners from a $300 opener replacement when a $150 sensor repair is the actual fix.
Sensor Alignment on Heavy Doors
On Sunset’s older wood sectional doors, the track hardware flexes just enough over decades to throw sensor alignment off even when nothing is visibly wrong. The door itself may be heavy enough that closing pressure varies. Realigning the sensors and checking the track brackets is a 30-minute job that keeps the door from pausing and reversing unpredictably.

Why Coastal Air Worsens Sensor Failures
The salt-laden air in this part of Miami-Dade accelerates corrosion on low-voltage connections. Sensor wire splices that would last 20 years inland can fail in 6 or 8 years here. We use sealed connectors and heat-shrink on outdoor-rated wiring so the fix holds, and we’ll tell you if the sensor units themselves are at end of life.
Trusted Brands We Service in Sunset
Craftsman Garage Door Repair is trained and experienced on eight major garage door and opener brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That brand span matters in Sunset because the original doors and openers here are a mixed inventory, whatever the builder spec’d in 1984 or whatever a previous owner swapped in. We work on the brand you already have, including the LiftMaster and Chamberlain chain-drive units still common in this area and the Raynor and Genie openers scattered through the older subdivisions. Because we service all of them, our vans carry the common parts for each family of equipment, which means we don’t waste a Sunset homeowner’s afternoon ordering a gear kit from somewhere.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Sunset Homes
- Original torsion springs failing all at once. The 1980s – 90s springs in Sunset’s villa and townhome clusters simply aged out on a shared timeline. When one door in a complex goes, the neighbors’ doors are usually months behind it.
- Chain-drive openers burning out on heavy original doors. A tired spring shifts the door’s full weight onto the opener motor. The opener strains, reverses, and eventually strips its gear or overheats. We fix the spring first, then see if the opener actually needs replacing.
- Rusted hinges, cables, and spring coils from coastal air. Early steel sectional doors in Sunset’s ranch homes didn’t get galvanized hardware in many cases. The coastal air works on that bare metal year-round, so cables fray and springs snap before their rated cycles are used up.
- HOA color and panel-profile mismatches stalling replacements. Sunset has many HOA-governed subdivisions, and the approved door color from 1992 often no longer exists in the current manufacturer palette. We’ve seen doors held up on replacement because the HOA required a specific beige that isn’t made anymore. Sourcing a compliant profile takes longer than the install itself.
Pricing for Garage Door Repair in Sunset, FL
Garage door repair in Sunset generally runs $150 to $600 for the most common jobs. The specific number depends on what actually failed and how much of the system is involved. Spring replacement sits at $180 to $340 for a standard torsion pair on a typical two-car door. Cable repairs run $130 to $250, opener repairs $120 to $320, and panel replacement $250 to $500 for common steel sections. New doors on these Sunset homes usually come in between $700 and $2,200 depending on wind-load rating, insulation, and HOA color matching. The range is real because the job is real: we quote a fixed price after we see the door, and that price is agreed before any work starts. Estimates are free. Call (844) 734-6077 and we’ll come out, look at the door, and give you a written number.
| Repair Type | Typical Price in Sunset |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Panel Replacement | $250 – $500 |
We Also Serve Cities Near Sunset
Craftsman Garage Door Repair covers Sunset and the surrounding southwestern Miami-Dade communities, including Olympia Heights, Westwood Lake, Richmond Heights, and Kendale Lakes. If you’re in one of those neighborhoods, this same team and the same pricing apply. Garage Door Repair in Sunset is one part of our broader coverage across the area, so you don’t need a different contractor because you’re two miles down the road.
Serving Sunset, FL — Our Local Coverage Area
We’re based in the Sunset area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Sunset
Yes, often. Sunset sits in the High-Velocity Hurricane Zone under the Florida Building Code, so the doors here are wind-load-stamped and tied to product approval numbers. If a panel or an entire door needs replacement, the new components must meet the current wind-load compliance for this zone. We check the door’s existing stamp before recommending any replacement component, which keeps the repair code-legal and keeps your homeowner’s insurance position intact. Call (844) 734-6077 if you’re unsure about your door’s compliance.
Usually because the torsion spring has lost tension and the opener is now lifting the full weight of the door. Original wood sectional doors in Sunset’s ranch homes can weigh 150 to 350 pounds, and no opener is designed to do that job alone. The opener overheats, reverses, and strips its gear. The fix starts with the spring. Call (844) 734-6077 and we’ll diagnose both the spring and the opener before quoting anything.
Standard torsion springs on 1970s – 90s doors are rated for 10,000 cycles, which works out to about 8 to 12 years with normal two-car use. In Sunset’s coastal air, rust can shorten that lifespan even if the spring hasn’t reached its cycle count. If you don’t know when your springs were last replaced, and the house is older than 20 years, they’re likely due. Call (844) 734-6077 for a spring check.
Usually yes, but it can take sourcing time. Many Sunset subdivisions approved door colors in the 1980s and 90s that no longer exist in the current manufacturer palette. We match the profile and work with the HOA approval process to find a code-compliant door that satisfies the board. The matching often takes longer than the installation. We’ll give you a realistic timeline before you commit.
Very common in Sunset. The year-round humidity and salt-laden air corrode the low-voltage sensor connections and throw the alignment off. It’s almost never the opener. Sensor recalibration or wire replacement usually runs $120 to $240, and we can tell within minutes whether the sensors are the culprit. Call (844) 734-6077 and we’ll sort it out.
We were called to a ranch home off SW 72nd Street where the homeowner’s LiftMaster chain-drive opener was straining and reversing halfway up a heavy original wood sectional door. The real culprit was a tired torsion spring and a stretched cable pulling the drums out of balance. We replaced the spring pair with high-cycle springs rated 25,000 cycles and up, re-tensioned the cables, reset the end bearing plates, and re-set the photo-eye sensors. One trip, door balanced, opener no longer working overtime. That’s the kind of repair Sunset’s older homes need most.
If your garage door is down, noisy, or failing in a way you can’t explain, call (844) 734-6077 for a free estimate. We’ll come out, diagnose what’s actually wrong, and give you a written price before any work starts. Same-day service is available for spring and cable failures, and emergency calls from Sunset are prioritized.
Written by Marco Delgado, Owner at Craftsman Garage Door Repair, serving Sunset and the southwestern Miami-Dade area.